Difference between revisions from 2014/01/13 14:45 and 2014/01/13 14:44.!!arduino pins connected
| rotator azimuth | '''A7''' |
| CW | '''D6''' |
| CCW | '''D7''' |
| CW switch | '''A5''' |
| CCW switch | '''A4''' |
| Brake | '''D8''' |
| Start switch | '''A3''' |
| CW encoder | '''D10''' |
| CCW encoder | '''D9''' |
| LCD | '''2,3,4,5,11,12''' |
| Free/unused |
| SW1 | '''A0''' |
| LED SW1 | '''D13''' |
| SW2 | '''A6''' |
| SW3 | '''A2''' |
| SW4 | '''A1''' |
!!PCB
[http://remoteqth.com/hw/multirot-lcd.brd.png]
[http://remoteqth.com/hw/multirot-lcd.sch.png]
[http://remoteqth.com/hw/multirot.brd.png]
[http://remoteqth.com/hw/multirot.sch-l.png|link=http://remoteqth.com/hw/multirot.sch.png]
!!partlist
| component | value | quantity |
| PCB | | '''2''' |
| LCD 2x16 | | '''1''' |
| Arduino | nano | '''1''' |
| socket | DIP32 | '''1''' |
| D-sub 15 female angle pcb | | '''1''' |
| D-sub 15 male | | '''1''' |
| D-sub 15 male case | | '''1''' |
| Encoder 24imp | | '''1''' |
| knob black | | '''1''' |
| LED switch | blue | '''1''' |
| LED switch | green | '''2''' |
| strip 16 pin | | '''1''' |
| strip 2 pin (jumper) | | '''2''' |
| jumper | | '''2''' |
| angle strip 9 pin | | '''1''' |
| angle strip 13 pin | | '''1''' |
| Relay F1CA005V | '''5V''' | '''3''' |
| L1 L2 | '''100 uH''' | '''2''' |
| R9 trimr | '''1K''' | '''1''' |
| Q1 Q2 Q3 | '''BC547''' | '''3''' |
| C1 C2 C3 C4 C5 | '''4n7/100V''' | '''5''' |
| R1 | '''1k''' | '''1''' |
| R2 R3 R4 | '''2k5''' | '''3''' |
| R5 R6 R7 R8 | '''k51''' | '''4''' |
| diode D1 D2 D3 D4 | x | '''4''' |
[http://remoteqth.com/img/wiki-rotator-server-motor.png]