Arduino band decoder connections

Difference between revisions from 2013/11/06 20:26 and 2013/09/17 07:39.
* switch '''JP1''' jumper to programable arduino{br}[]
* connect '''USB/UART''' interface for '''programing arduino''' mini board to SV1{br}[]
* '''upload''' the arduino '''code'''
* switch '''JP1''' jumper to DB9 CAT{br}[]
* power on JP2{br}[]
* connect TRX (with(between male connectors){br}[]{br} If connect TRX CAT with PC logbook, '''do not connect''' TX wire from decoder (pin 3<-->3). Decored will worked in sniff mode.
* signals on '''BCD'''{br}[]