ethernet_splitter_poe
This is an old revision of the document!
Ethernet splitter +POE
- For split/join two 100 Mbit ethernet, to one UTP wire +POE (for use need two module)
- POE terminal transfer DC voltage from one end to second
- POE limitation MAX 24V/640mA (15W)
- Both side center RJ45 connetor LED, show if POE is present
- ESD protection with transient voltage suppressor
- Ethernet is galvanically isolated, with insulation 2x 1,5 kV
- Center single wire recomended use with SFTP cable (shield)
- Two grounding potentials GND and PE (Earth) for center line
Source
ethernet_splitter_poe.1604133479.txt.gz · Last modified: 2020/10/31 09:37 by ok1hra
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
